Biomining is an approach to the extraction of desired minerals from ores. Microorganisms are used to leach out the minerals, rather than the traditional methods of extreme heat or toxic chemicals, which have a deleterious effect on the environment.
Maps, Directions, and Place Reviews
Overview
The development of industrial mineral processing has been established now in several countries including South Africa, Brazil and Australia. Iron-and sulfur-oxidizing microorganisms are used to release occluded copper, gold and uranium from mineral sulfides. Most industrial plants for biooxidation of gold-bearing concentrates have been operated at 40 °C with mixed cultures of mesophilic bacteria of the genera Acidithiobacillus or Leptospirillum ferrooxidans. In subsequent studies the dissimulatory iron-reducing archaea Pyrococcus furiosus and Pyrobaculum islandicum were shown to reduce gold chloride to insoluble gold.
Using Bacteria such as Acidithiobacillus ferrooxidans to leach copper from mine tailings has improved recovery rates and reduced operating costs. Moreover, it permits extraction from low grade ores - an important consideration in the face of the depletion of high grade ores.
The potential applications of biotechnology to mining and processing are countless. Some examples of past projects in biotechnology include a biologically assisted in situ mining program, biodegradation methods, passive bioremediation of acid rock drainage, and bioleaching of ores and concentrates. This research often results in technology implementation for greater efficiency and productivity or novel solutions to complex problems. Additional capabilities include the bioleaching of metals from sulfide materials, phosphate ore bioprocessing, and the bioconcentration of metals from solutions. One project recently under investigation is the use of biological methods for the reduction of sulfur in coal-cleaning applications. From in situ mining to mineral processing and treatment technology, biotechnology provides innovative and cost-effective industry solutions.
The potential of thermophilic sulfide-oxidizing archaea in copper extraction has attracted interest due to the efficient extraction of metals from sulfide ores that are recalcitrant to dissolution. Microbial leaching is especially useful for copper ores because copper sulfate, as formed during the oxidation of copper sulfide ores, is very water-soluble. Approximately 25% of all copper mined worldwide is now obtained from leaching processes. The acidophilic archaea Sulfolobus metallicus and Metallosphaera sedula tolerate up to 4% of copper and have been exploited for mineral biomining. Between 40 and 60% copper extraction was achieved in primary reactors and more than 90% extraction in secondary reactors with overall residence times of about 6 days.
The oxidation of the ferrous ion (Fe2+) to the ferric ion (Fe3+) is an energy producing reaction for some microorganisms. As only a small amount of energy is obtained, large amounts of (Fe2+) have to be oxidized. Furthermore, (Fe3+) forms the insoluble Fe(OH)
3 precipitate in H2O. Many Fe2+ oxidizing microorganisms also oxidize sulfur and are thus obligate acidophiles that further acidify the environment by the production of H2SO4. This is due in part to the fact that at neutral pH Fe2+ is rapidly oxidized chemically in contact with the air. In these conditions there is not enough Fe2+ to allow significant growth. At low pH, however, Fe2+ is much more stable. This explains why most of the Fe2+ oxidizing microorganisms are only found in acidic environments and are obligate acidophiles.
The best studied Fe2+ oxidizing bacterium is Acidithiobacillus ferrooxidans, an acidophililic chemolithotroph. The microbiological oxidation of Fe2+ is an important aspect of the development of acidic pH's in mines, and constitutes a serious ecological problem. However, this process can also be usefully exploited when controlled. The sulfur containing ore pyrite (FeS2) is at the start of this process. Pyrite is an insoluble crystalline structure that is abundant in coal- and mineral ores. It is produced by the following reaction:
Normally pyrite is shielded from contact with oxygen and not accessible for microorganisms. Upon exploitation of the mine, however, pyrite is brought into contact with air (oxygen) and microorganisms and oxidation will start. This oxidation relies on a combination of chemically and microbiologically catalyzed processes. Two electron acceptors can influence this process: O2 and Fe3+ ions. The latter will only be present in significant amounts in acidic conditions (pH < 2.5). First a slow chemical process with O2 as electron acceptor will initiate the oxidation of pyrite:
This reaction acidifies the environment and the Fe2+ will be formed is rather stable. In such an environment Acidithiobacillus ferrooxidans will be able to grow rapidly. Upon further acidification Ferroplasma will also develop and further acidify. As a consequence of the microbial activity (energy producing reaction):
Fe2+ -> Fe3+
This Fe3+ that remains soluble at low pH reacts spontaneously with the pyrite:
FeS2 + 14 Fe3+ + 8 H2O -> 15 Fe2+ + 2 SO42- + 16 H+
The produced Fe2+ can again be used by the microorganisms and thus a cascade reaction will be initiated.
Gold Biotechnology Video
Processing methods
In the industrial microbial leaching process popularly known as bioleaching, low grade ore is dumped in a large pile (the leach dump) and a dilute sulfuric acid solution (pH 2) is percolated down through the pile. The liquid coming out at the bottom of the pile, rich in the mineral is collected and transported to a precipitation plant where the metal is reprecipitated and purified. The liquid is then pumped back to the top of the pile and the cycle is repeated.
Acidithiobacillus ferrooxidans is able to oxidize the Cu+ in chalcocite (Cu2S) to Cu2+, thus removing some of the copper in the soluble form, Cu2+, and forming the mineral covellite (CuS). This oxidation of Cu+ to Cu2+ is an energy yielding reaction (such as the oxidation of Fe2+ to Fe3+). Covellite can then be oxidized, releasing sulfate and soluble Cu2+ as products.
A second mechanism, and probably the most important in most mining operations, involves chemical oxidation of the copper ore with ferric (Fe3+) ions formed by the microbial oxidation of ferrous ions (derived from the oxidation of pyrite). Three possible reactions for the oxidation of copper ore are:
The copper metal is then recovered by using Fe0 from steel cans:
The temperature inside the leach dump often rises spontaneously as a result of microbial activities. Thus, thermophilic iron-oxidizing chemolithotrophs such as thermophilic Acidithiobacillus species and Leptospirillum and at even higher temperatures the thermoacidophilic archaeon Sulfolobus (Metallosphaera sedula) may become important in the leaching process above 40 °C. Similarly to copper, Acidithiobacillus ferrooxidans can oxidize U4+ to U6+ with O2 as electron acceptor. However, it is likely that the uranium leaching process depends more on the chemical oxidation of uranium by Fe3+, with At. ferrooxidans contributing mainly through the reoxidation of Fe2+ to Fe3+ as described above.
Gold is frequently found in nature associated with minerals containing arsenic and pyrite. In the microbial leaching process At. ferrooxidans and relatives are able to attack and solubilize the arsenopyrite minerals, and in the process, releasing the trapped gold (Au):
Biohydrometallurgy is an emerging trend in biomining in which commercial mining plants operate continuously stirred tank reactor (STR) and the airlift reactor (ALR) or pneumatic reactor (PR) of the Pachuca type to extract the low concentration mineral resources efficiently.
Source of the article : Wikipedia
EmoticonEmoticon